Pre-grinding & deburring in sheet metal processing
Pre-grinding and deburring in sheet metal processing
Thermal cutting of sheet metal parts creates primary burrs, unevenness, and residues on the component surface. These lead to uneven tool engagement and impair the stability of subsequent processing steps.
Pre-grinding is the preparatory process step in which surfaces are leveled and the primary burr is removed in a controlled manner. This creates a uniform starting condition for further processing.
In the subsequent deburring process, any remaining burrs are selectively removed and the edge is functionally finished. The goal is a defined component condition with reproducible edge and surface properties.
Only through the coordinated interplay of pre-grinding and deburring can stable process conditions be created that enable uniform coating uptake, reduced rework and reproducible subsequent processes.
What is primary burr formation in sheet metal?
Primary burrs form during thermal and mechanical cutting processes such as laser, plasma, or oxyfuel cutting, as well as punching. In these processes, material at the cutting edge is plastically displaced or incompletely removed and remains as a burr on the component edge.
This primary burr protrudes beyond the actual workpiece contour and leads to uneven contact conditions in subsequent machining steps. This results in unstable machining conditions, increased tool wear, and inconsistent edge quality.
Additionally, the separation process can create unevenness, splashes or residues on the surface, which further affect the tool engagement and limit the reproducibility of subsequent processes.
In the pre-grinding process, the primary burr is removed in a controlled manner and the surface is leveled to create a uniform starting condition. This is crucial for the subsequent deburring process, which allows for the targeted removal of secondary burrs and enables defined edge finishing.
Tools for pre-grinding and deburring
The tool selection in the pre-grinding and deburring process step depends on the initial condition, the material, and the desired material removal. The goal is a uniform tool engagement that removes the primary burr in a controlled manner and prepares the component surface for subsequent machining steps.
Unevenness, spatter, and burrs that arise during thermal cutting lead to inconsistent contact conditions between the tool and the workpiece. Without pre-grinding, unstable machining conditions result, leading to increased tool wear and inconsistent edge quality.
In pre-grinding, abrasive fabric belts are used to reduce unevenness, level the surface and remove primary burrs in a controlled manner.
Non-woven hook and loop discs are used in the process step to finely process surface areas and create a uniform starting condition for subsequent deburring.
Grinding stars support the processing of contour-dependent areas and help to selectively process primary burrs and surface irregularities.
The result is a defined initial state with reduced unevenness, controlled primary burr processing and stable conditions for subsequent deburring and edge rounding.
Abrasive belts for pre-grinding in sheet metal processing
In the pre-grinding process step, grinding belts are used to level the component surface and remove primary burrs in a controlled manner. The aim is a uniform tool engagement that creates stable conditions for subsequent machining steps.
Unevenness, spatter, and burrs that arise during thermal cutting lead to inconsistent contact conditions between the tool and the workpiece. Without pre-grinding, this results in increased tool wear, unstable machining processes, and inconsistent edge quality.
During pre-grinding, Abrasive belts used to specifically reduce these irregularities, smooth the surface and create a defined starting state for subsequent deburring.
The result is a uniformly machined surface with reduced primary burr and stable conditions for the targeted removal of secondary burr and subsequent edge rounding.
Abrasives for defined results in pre-grinding
The choice of abrasive influences the material removal, tool engagement, and reproducibility during pre-grinding and deburring of sheet metal parts.
Different abrasives are used depending on the material, sheet thickness, burr size, and desired surface finish. Crucially, the abrasive grain, backing material, and tool design must be matched to the specific process.
An unsuitable selection of abrasives leads to uneven material removal, increased tool wear and fluctuating surface quality.
The appropriate abrasive creates a controlled material removal and supports a defined starting condition for subsequent deburring and edge rounding.
Grinding wheels for pre-grinding and light deburring
Grinding wheels are used in the process step of pre-grinding and light deburring to reduce remaining primary burrs and to selectively rework surface areas.
After thermal cutting and initial grinding, local burr structures and surface irregularities may still exist, leading to uneven transitions between surface and edge.
In this process step Sanding discs used to process these areas in a controlled manner, to locally control material removal and to prepare a smooth transition for subsequent deburring and edge rounding.
The result is a uniformly reworked surface with reduced residual burr and stable conditions for reproducible subsequent processes.
Grinding stars for contours, pipes and profiles
Grinding stars are used in the pre-grinding and deburring process steps when contour-dependent areas, pipes, or profiles need to be machined. Their flexible tool structure allows them to adapt to different component geometries.
When cutting pipes, profiles and hard-to-reach areas, local burr structures and surface irregularities often occur, which are only partially accessible with flat tools.
In this process step Grinding stars used to selectively treat these areas, reduce primary burr and create a uniform starting condition for subsequent processes.
The result is uniformly machined contours with reduced burr structures and stable conditions for subsequent deburring and edge rounding.
Pre-grinding and deburring as the basis for stable processes
Pre-grinding and deburring form the basis for reproducible edge and surface finishing of sheet metal parts. Only a defined initial condition enables consistent tool engagement and stable machining conditions.
Targeted material removal reduces primary burrs, unevenness, and local surface irregularities. This creates uniform conditions for subsequent deburring and edge rounding.
A coordinated use of abrasives and tools ensures that components have reproducible edge and surface properties and that subsequent processes such as coating or assembly can be carried out stably.
The result is a defined component condition with controlled material removal, smooth transitions between surface and edge, and reduced rework and scrap.
OUR CUSTOMERS' SUCCESS
SAVING PROCESSING TIME
By customizing our tools for each customer, process times can be significantly reduced. A customer case shows that up to 80 % of processing time can be saved during deburring.
MAXIMIZING EDGE ROUNDING
The latest generation of deburring discs maximizes the abrasive surface area thanks to the innovative arrangement and slotted structure of the abrasive flaps, increases material removal at the sheet metal edge and significantly improves the performance of your deburring machine.
PROCESS OPTIMIZATION
Our customers benefit from our extensive consulting and application experience. This expertise guarantees maximum competitiveness through high-performance processes in every production environment.
PRE-GROUNDING IN ACTION ON A VARIETY OF MACHINES
You are currently viewing placeholder content from YouTube. To access the actual content, click the button below. Please note that this will involve sharing data with third parties.
More information
